News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image)

FORUMAMONTRES › Forums › Forum ROLEX (Non officiel) › News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image)

15 sujets de 1 à 15 (sur un total de 258)
  • Auteur
    Messages
  • #410000027731
    ZEN
    Membre

    News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) Deepsea1

    #420000395836
    Invité
    Membre

    de profil:

    News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) Sd2nv7wq6

    et ses p’tites fesses

    News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) Sd3cd5kj4

    et de nuit

    News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) Image13mw2

    et une dernière pour la route

    News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) J9c0wplmxu31jr3m7kuu2mv3

    Photos trouvées sur le site rolex.com

    H3

    #420000395837
    olaf
    Membre

    Ouchi mama!! Ca fait mal ça… tout simplement merveilleuse, en attendant d’avoir les specs et le prix.

    #420000395838
    Invité
    Membre
    olaf a écrit:
    …en attendant d’avoir les specs ….

    et hop!

    Citation :
    OLEX OYSTER PERPETUAL SEA-DWELLER DEEPSEA
    TECHNICAL FEATURES

    CASE ARCHITECTURE AND WATERPROOFNESS
    A watch developed for extreme depths, guaranteed waterproof to 3,900 metres (12,800 feet), the Sea-Dweller DEEPSEA required the design of a case with a unique architecture, the RINGLOCK SYSTEM. This innovation patented by Rolex consists of a combination of three distinctive features:

    • The high-performance ring
    Set inside the middle case of the watch between the crystal and the case back, the high-performance nitrogen-alloyed stainless steel ring withstands the pressure exerted by water on the crystal and the case back.
    The middle case is made from 904L steel.

    • The sapphire crystal
    To resist pressure, the synthetic sapphire crystal is slightly domed and substantially thicker than the crystals of other Oyster models.

    • The case back
    The case back is made of a titanium alloy, an extremely resistant stainless material. It is held in place against the high-performance ring by means of a 904L-steel ring.
    The helium valve is made of high-performance stainless steel. Its size is adapted to the dimensions of the case to achieve optimal waterproofness. The helium valve is a safety feature, which, during the decompression phase, releases the gases that infiltrate into the watch during caisson dives.
    Indeed, between dives at great depths, professional divers use pressurised caissons in which they breathe high-pressure gas mixtures, notably containing helium, a very volatile gas that penetrates into the watch. As the diver resurfaces, the helium valve prevents damage to the watch.
    The Triplock winding crown, equipped with three seals and screwed onto the case, completes this ingenious waterproof system.

    DISPLAY AND LEGIBILITY

    The bezel
    The Sea-Dweller DEEPSEA is equipped with a unidirectional rotatable bezel with a
    60-minute graduated black CERACHROM disc that allows the diver to precisely track his dive time.
    Engraved in the CERACHROM, the numerals and the graduations are filled with platinum through the use of a PVD technique patented by Rolex.
    The zero marker of the graduated bezel, represented by a triangle, is visible longer at night or in the depths of the ocean thanks to a capsule containing a new luminescent material that emits a blue glow.

    The dial
    To enhance legibility, the gold indexes and hands are wider and partially coated with the same new luminescent material and also emit a blue colour.

    The movement
    The Sea-Dweller DEEPSEA is equipped with calibre 3135, known for its chronometric precision, its reliability and its robustness; it also features a PARACHROM hairspring with high resistance to shocks and magnetic fields.
    Certified as a chronometer by the Swiss Official Chronometer Testing Institute (COSC), the movement has a 48-hour power reserve.

    The bracelet
    Manufactured from solid 904L steel, the Sea-Dweller DEEPSEA bracelet can be adjusted for wear over a diving suit up to 7 mm thick thanks to a double extension system:
    • Fliplock extension links,
    • the new GLIDELOCK clasp, allowing fine adjustments.

    A series of rigorous tests
    Because deep-sea diving requires absolute reliability and safety, each Sea-Dweller
    DEEPSEA must pass Rolex’s rigorous waterproofness tests. To this end, special equipment has been developed with the help of COMEX (Compagnie Maritime
    d’Expertise), a world-renowned French company specialising in underwater engineering and hyperbaric technologies.

    ROLEX OYSTER PERPETUAL SEA-DWELLER DEEPSEA
    FUNCTIONING
    THE UNIDIRECTIONAL ROTATABLE BEZEL
    The Oyster Perpetual Sea-Dweller DEEPSEA allows a diver to safely track his dive time thanks to the unidirectional graduated bezel featured on the watch.

    At the beginning of a dive
    Once in the water, before beginning his descent, the diver turns the bezel to align the triangle on the graduated bezel to the minute hand, thus indicating the start time of his dive.

    During the dive
    The dive time can be read against the graduated bezel.
    Since the DEEPSEA bezel turns only counterclockwise, any accidental rotation can only have the effect of shortening the dive time.

    THE GLIDELOCK CLASP
    The new GLIDELOCK clasp allows for fine adjustments to the bracelet length, up to 18 mm by increments of 1.8 mm, without removing the watch.
    1 Pull up the clasp’s safety catch.
    2 Pull up the centre panel of the clasp cover. The teeth located underneath it become visible.
    3 Pull gently on the 12-o’clock side of the bracelet to lengthen it, or slide it into the clasp to shorten it. Adjustments can be made in 1.8 mm increments, up to a total of 18 mm.
    4 Once the bracelet has been adjusted to the desired length, close the centre panel.
    5 Close the safety catch.

    H3

    #420000395839
    MaticDenFace
    Membre

    Assez sexy cette vue de coté :
    News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) J9c0wplmxu31jr3m7kuu2mv3
    J’aime beaucoup le verre bombé qui affleure la lunette. Avec les reflets de la céramique ça peut étre sympa News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) Tongue

    Je trouve dommage que Rolex n’ai pas repris comme fonte de lunette celle de la nouvelle GMT II :

    News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) Avatar2

    Surement pour conserver le coté ‘tool watch vintage’ News: Rolex Oyster Perpetual Sea-Dweller Deepsea (Image) Lol2

    Grosse interrogation, le poids… vu que la new GMT est déja assez lourde.
    A manipuler en vrai pour se faire une idée avant de la commander !

    #420000395840
    olaf
    Membre

    Impressionant… juste une interrogation sur la luntte CERACHROM, c’est en base ceramique et en PVD ou bien?

    Et puis curieux de voir les index nous sortir une lumière bleu, ça doit être de toute beauté.

    Merci pour ces infos, c’est du très lourd.

    #420000395841
    ximun
    Membre

    PLus je la vois plus je me dis que la seule chose vraiment dommage est la "bague" sous le verre autour du cadran, avec les inscriptions. Elle est justifiée par le cahier des charges 8000000m de profondeur si j’ai bien compris, mais sans ça avec un cadran plus grand ce serait mieux je pense…

    APrès pour la taille et le poids de l’engin, à voir !

    EDIT : D’un autre côté vu que c’est la seule modif qui sauterait aux yeux d’un ignare, c’est peut-être pour ça que je tique… Smile

    #420000395842
    clinique
    Membre

    du lourd , du tres lourd cette annee. une pure merveille. merci rolex. bravohap M2#ca y est ma seadweller est devenue une montre de transition. thumright thumright

    #420000395843
    skeleton31
    Membre

    si c’st vraiment un verre bombé , ca va etre une tuerie cette montre , elle a l’air d’avoir des courbes magnifiques .

    tu evends ta 1680 h3 ?? Fier 2

    _________________

    _________________
    l’homme n’est que poussiere…d ‘où l’interêt de la balayette !

    #420000395844
    nystagmus
    Membre

    Dommage les inscriptions sur le "toit" du réhaut

    sinon trés sympa

    #420000395845
    hendpton
    Membre

    Vu les specifications de la montre, la hausse de tarif risque d’être impressionante non?
    Je trouve que c’est la vue de profile qui a le plus changé.
    Elle fait beaucoup plus massive. a la limite "Panerai"

    #420000395846
    Mx
    Membre
    ximun a écrit:

    APrès pour la taille et le poids de l’engin, à voir !

    +1 esthétiquement très belle, mais vraiment envie de la voir "en live" de la toucher de l’essayer, avant de porter un réel jugement.
    Niveau marketing, 3900m ils ont enterré la concurrence… quand on parlait de 1200m pour Oméga… ils vont encore une fois avoir les honneurs de la presse pour cette prouesse technologique (qui reste bien inutile pour le commun des mortels) Qui a dit qu’il n’y avait que Tag Heuer qui gerait bien son marketing ?)

    _________________

    _________________
    « Un bon jugement est le fruit de l’expérience, l’expérience s’acquiert en faisant des erreurs de jugements… »

    #420000395886
    Did666
    Membre
    Marcant a écrit:
    C’est déjà fait. J’ai vendu ma speed pour acquérir une SD soit ancienne version ou nouvelle. Après reste à connaître la dispo !

    Sur Paris, tu ne vas pas avoir de mal a en trouver Impec

    #420000395887
    Marcant
    Membre
    Did666 a écrit:
    Sur Paris, tu ne vas pas avoir de mal a en trouver

    Je vais passer samedi dans une boutique pour avoir quelques infos dessus et surement annuler ma réservation de ma Radiomir !

    #420000395888
    km’rol
    Membre
    Marcant a écrit:
    Did666 a écrit:
    Sur Paris, tu ne vas pas avoir de mal a en trouver

    Je vais passer samedi dans une boutique pour avoir quelques infos dessus et surement annuler ma réservation de ma Radiomir !

    tu vas un peu vite en besogne non ? Shocked

    _________________

    _________________
    À mes groupies énamourées : mes photos dédicacées sont en cours de réimpression clown

15 sujets de 1 à 15 (sur un total de 258)
  • Vous devez être connecté pour répondre à ce sujet.