- Ce sujet contient 24 réponses, 10 participants et a été mis à jour pour la dernière fois par
, le il y a 2 années.
-
Messages
-
Whaou en english…. en cette période de Brexit ça va tousser grave
44 me et 2500 $ ça va cartonner grave
I am fron Russia and English it is the easiest way for me to communicate with another nationalities)
Mister N, i was have a little conversation with administration of this forum and they said that i can post in English there. 2500$ is the approx price for customized watch, basic version will be priced at 2000$.
- xabixab a écrit:
- Dommage qu’il y ait un truc en plein milieu, on voit pas bien la montre du coup…
It’s just needs to get used)
Central disk was especially made for engravings and other options of personalisation.
quite orignal at 1st look.
unless i’m wrong (i’m just a casual), at least it shows there is still some « innovation » in design.gratz for this concept
- oldboyz a écrit:
- quite orignal at 1st look.
unless i’m wrong (i’m just a casual), at least it shows there is still some « innovation » in design.gratz for this concept
Thanks you! One of the goals of this project was to make something simple and original looking at the same time.
Hi Rashid, and congrats for your project.
If you are not aware about this forum, very often, people are very strict and critical here.
From my point of view, 44mm is way too big (well, I have a small wrist, ~16cm).Can you justify the price?
The ETA is not the less expensive movement, we agree on that, I guess you had to do some researches about how to include the « shield piece » in the middle of the the mineral(?)/sapphire(?) glass and all of the finishing you talked about cost something.
But 2500$ does not seem to be justified except if you can give us more informations maybe?
Exceptionnellent OK pour l’anglais .
__________________________________
Contraria contrariis curantur. (Les contraires se guérissent par les contraires).En passant, un sous forum angliche spiquinge peut être?
Cela pourrait ouvrir des discussions internationales a terme.Désolé pour le HS.
Je dois dire que j’ai par ailleurs bien du mal a m’intéresser a ce projet…
- Manivel a écrit:
- En passant, un sous forum angliche spiquinge peut être?
Cela pourrait ouvrir des discussions internationales a terme.Désolé pour le HS.
Je dois dire que j’ai par ailleurs bien du mal a m’intéresser a ce projet…
Le sous forum angliche pourrait être une bonne idée , mais je ne sais pas si il serait très actif…
Par exemple le forum tchèque Chronomag a une section en anglais mais elle dort (a mon grand désespoir d’ailleurs…)
@Rashid, thanks for sharing and congrats, your concept is innovative and very different from the usual production.
I also have concerns regarding the size, as the watch looks massive with the shield. Can you post some wristshots so we have a better idea?
- niko93 a écrit:
- Hi Rashid, and congrats for your project.
If you are not aware about this forum, very often, people are very strict and critical here.
From my point of view, 44mm is way too big (well, I have a small wrist, ~16cm).Can you justify the price?
The ETA is not the less expensive movement, we agree on that, I guess you had to do some researches about how to include the « shield piece » in the middle of the the mineral(?)/sapphire(?) glass and all of the finishing you talked about cost something.
But 2500$ does not seem to be justified except if you can give us more informations maybe?
Hello niko93!
Don’t worry i always opened for critics so everything is ok.
Yes 44mm seem to be a big size but it this watch fits good on the wrist thanks to low strap fixation points and strap itself. For example my wrist is quite thin, but the watch fits ok.
Yes, i using ETA 6498-2 movement which is higher version of 6498. Yes 6498-2 is not something extremely expensive, but it makes a sense anyway.
I fixed Shield in the glass itself , of course i ising a sapphire glass.
About pricing.2500$ is the price for fully customized watch (base version of the watch is priced at 1800$), so you can customize shield, dial, ask for another shape of hand and also customize caseback.
For example custom watch with lion on shield and roman numerals is priced at 2000$.
- Vous devez être connecté pour répondre à ce sujet.