FORUMAMONTRES › Forums › FORUMAMONTRES › Montres GMT ??
- Ce sujet contient 15 réponses, 7 participants et a été mis à jour pour la dernière fois par
Hatari, le il y a 20 années et 7 mois.
-
AuteurMessages
-
25 février 2006 à 8h23 #410000004696
Hatari
MembreQue pensez-vous de la Breitling Navitimer World comparée à la Rolex GMT II, je sais qu’elles sont différentes dans leur aspect, mais dans l’usage quant est-il ?
25 février 2006 à 8h37 #420000037424Invité
Membrebonjour,une navitimer gmt j’adhere pas,déja 46mm,en plus une navitimer tu a le rehaut de la lunette tournante ouvert,ce qui doit donner une ouverture de cadran énorme,genre théatre antique.
une navitimer doit en rester une,c’est a dire avec un maximum de rappel aux premieres.
la rolex gmt,et bien elle est tout simplement superbe,ce n’est pas une vrais sportive,mais c’est une authentique rolex,qualitée,fiabilitée,discréte et intemporelle.
une montre à avoir.25 février 2006 à 9h33 #420000037425mickey
Membrebonjour,perso je prendrais la rolex pour 2 raisons:
1 c est une manufacture donc il n y a pas photo
2 j ai un ami qui a la breitling et hors mis le fait que le cadran tout noir soit sublime(a mon gout) sa taille en fait une montre tres moche perso pour une navitimer le top ce cerait une olympus 42mm avec le cadran de la world
ceci dit je ne suis ni fan de rolex(j en ai déja eu 2:une oyster date et une submariner date) a part peu etre la daytona(mais bonjour le prix) sinon je n acheterai jamais plus de rolex trop décu,j aime encore mieux ma frederique constant(je ne vais pas me faire que des amis:mais bon je préfere etre franc)
et je ne suis pas fan de breitling(j ai déja eu une b2 et une chronomat:no comment)
mais si tu te focalise sur ces 2 montres sans hésitation la rolex(c est pas toujours facile a porté au vu des autres mais c est quand meme moins voyant qu une 46mm)25 février 2006 à 9h34 #420000037426yala
Membreça sert vraiment à quleque chose les GMT ?
Connaître le decallage horaire c’est pas compliqué faut juste faire une petite addition/soustraction
25 février 2006 à 9h57 #420000037427Dynamo
Membreen GMT :
– Omega Seamaster
– Enicar Sherpa Guide
– Enicar Sherpa Jet
– Les Rolex GMT
– hamilton Navy GMT c’est dans les 400€ elle jolie sympa et originalEn fait il y en a plein: la
25 février 2006 à 10h48 #420000037428Tokage
Membre‘Jour,
Entre les deux, je n’hésiterais pas une seconde : GMTII qui a tout pour elle (histoire et donc « légitimité », manufacture, etc.) au contraire me semble-t-il de la Breitling, dont je trouve le cadran peu lisible. Maintenant c’est vrai qu’il y a d’autres montres GMT chez Oris ou JLC par exemple.
Cordialement,
Nicolas
25 février 2006 à 11h05 #420000037429Hatari
MembreJ’ai le coup de coeur pour la Rolex GMT II avec lunette noire, je la trouve plus sobre qu’avec la lunette bleu/rouge ou même noire/rouge, est-ce que la lunette bicolore apporte un plus pour la lecture 24H00 ? ou est-ce purement esthétique ?
25 février 2006 à 11h11 #420000037430Dynamo
MembreUne lunette bicolore c’est pour avoir le jours – nuit plus rapidement.
25 février 2006 à 11h17 #420000037431Hatari
Membre- Dynamo a écrit:
- Une lunette bicolore c’est pour avoir le jours – nuit plus rapidement.
O.K – c’est très clair.
Lors de l’achat d’une Rolex GMT II neuve, y-a-t’il des élements à regarder « le n° du calibre » ou bien le numéro de la montre qui peut donner l’année de sa construction ?
Le bijoutier me signale que l’on peut changer la lunette à souhait suivant ses propres goûts, cette opération peut-elle être réalisée soi-même ou pas?25 février 2006 à 11h26 #420000037432Dynamo
MembreBon le chnagement de lunette vaux mieux passé par Monsieur SAV Rolo :
Pour le mouvment il faut savoir la version de GMT
- Citation :
-
GMT Watch manual
1-anatomy of a GMT
2-watch reading a GMT
3-watch setting a GMT
4-watch tipsINTRODUCTION
Wrist watches with a dual-time reading are often linked with the military of the commercial field. They provide a convenient mean of coping with time zone change. Certain watches and chronographs do simply display time on a 24 hour scale, whilst other combine both 12 and 24 hour reading.
In the nineteen fifties, Rolex designed the GMT Master, which was the very first watch to feature a dual time complication showing home time on a 24 hour display and local time on an independent 12 hour display. The feature proved out to be very convenient and allowed the pilots of PanAM to keep track of their home time while flying across time lines.
Since then, established watchmakers such as Citizen, Seiko, Omega and Blancpain have adopted this display, making it the standard for dual-time wristwatches.
This page aims at explaining the benefits of the 24 hour watch with independent 12 hour reading. The few user tips can also be applied to any other 24 hour watch or chronograph.
ANATOMY OF A GMT WATCH

(1). SECOND HAND
(2). MINUTE HAND
(3). INDEPENDENT 12 HOUR HAND: like a conventional watch, displays AM and PM local time
(4). 24 HOUR HAND: usually arrow-shaped and red, displays 24 hour home time
(5). DATE WINDOW
(6). SETTING CROWN, three positions: screwed in/out, setting position 1, setting position 2
(7). BIDIRECTIONAL ROTATING BEZEL: when present, either features 24 hour markings, 360 degrees bearing, 60 minutes divisions or major cities namesThe watch pictured left is the GMT from Blancpain’s Trilogie, a remarkable shot by fellow watch enthusiast Mike Margolis
Similar watches are
-Without bezel: Rolex Oyster Perpetual Explorer II
-With bezel: Omega Seamaster GMT, Rolex Oyster Perpetual GMT-Master I, Rolex Oyster Perpetual GMT-Master II, Seiko Kinetic/AGS Flightmaster, Seiko Kinetic/AGS Landmaster, Seiko Kinetic/AGS Landmaster Southpole, Seiko Kinetic/AGS Landmaster Sagarmatha, Seiko Kinetic/AGS Pipin Ferreras, Seiko Kinetic/AGS Scubamaster, Seiko perpetual calendar
READING A GMT WATCH
This is the diagram we are going to use. The minutes hand, the 12 hour hand, the 24 hour hand and the date window are represented. (The second hand has been left out to keep the dial less busy)
Like on a conventional watch, the 12 hour hand rotates twice a day, displaying AM and PM time on the dial.
On a conventional watch, the hand would be showing 10:10. But one would not be able to tell if it were AM or PM time
The 24 hour hand rotates just once a day, pointing at the outer ring, or bezel. And by doing so, it helps to differentiate between AM and PM time.Here, the 24 hand points at 10:10 (10:10 AM), and not 22:10 (10:10 PM)

Reading the display might turn out to be quite tricky at the beginning, yet once one gets the hold of it, it becomes a child’s play:
As one can see, the 24 hour hand completes a single revolution, whilst the 12 hour hand rotates twice, successively displaying AM and PM time.
SETTING A GMT WATCH

Here lies the particularity of the independent 12 hour complication first used by Rolex, and now Blancpain, Omega and Seiko:
Pulled in setting position 1, the crown makes the 12 hour hand jump forward or backward without affecting the rest of the mechanism.
When crossing a time zone, the wearer can simply adjust the 12 hour hand to local time, whilst the 24 hour retains home time.
The date indication is also for local time, so it only changes when the 12 hour hand has completed two revolutions
Pulled in setting position 2, the crown moves the whole 3 hands forward or backward and hacks the second (except on the Blancpain, where the second doesn’t hack)TIPS (les trucs et astuces)
Using a GMT watch like a professional

It has been brought to my attention that aviation professionals and licensed amateur radio hobbyists use their 24 hour hand to display UTC time, or Zulu Time:
They set the whole watch on Greenwich Mean Time (GMT 0), and then set the independent 12 hour hand on local time
In our example, if it is 10:10 AM in New York (GMT -5), the whole watch must be set 5 hours forward to display the Greenwich Mean Time (GMT 0)
The independent 12 hour hand can then be set 5 increments backwards to display local New York time (GMT -5)After this operation, the independent 12 hour hand is no longer synchronized with the 24 hour hand, unless it is being set 5 increments forward
Using a third time zone

It is possible to use a rotating bezel with 24 hour subdivisions to indicate a third time zone:
Simply rotate the bezel by one increment, per hour or time zone.
– Rotate the bezel counter clockwise if the third time zone is Eastern to home time
– Rotate the bezel clockwise if the third time zone is Western to home time
Example: if home time is New York (GMT -5), and third time Paris (GMT+1), move it 6 increments counter clockwise (+6)
If home time is New York (GMT -5), and third time San Francisco (GMT-
, move it 3 increments clockwise (-3) Using the GMT display as a rough solar compass

This tip also applies to practically all the other watches equipped with a 24 hour hand. The wearer can use a 24h dial for approximate navigation anywhere between the Tropic of Cancer and the Arctic Polar Circle:
Important! Both the 12 and the 24 hour hand must be synchronized to display local time
Method 1: laid horizontally, the dial will head North if the 24 hour hand is pointed towards the sun
Method 2: if the 12 hour hand is pointed at the sun, the 24 hour hand will point North
The margin of error directly depends on the difference between local official time and actual local solar time. But one doesn’t need to get too much in the technical details for approximate urban navigation
(Source : http://fejack.net/misc/gmt24/gmt24.htm)
Revue de l’OMEGA Seamaster GMT :
– Revue Omega GMT
– Revue Omega GMT25 février 2006 à 11h37 #420000037433Hatari
MembreMerci pour toutes ces infos Dynamo, là tu éclaires ma lanterne.
La Seamaster est très bien aussi, mais l’aiguille 12H00 est-elle indépendante comme chez Rolex ?
Il y a une chose que je ne comprends pas avec l’Explorer II, c’est d’avoir une lunette fixe, y-a-t’il vraiment une raison ?25 février 2006 à 11h55 #420000037434Dynamo
Membreperso pour l’explorer II c’est la presque la même montre que la GMT II sans la lunette tournate. Pour l’omega Seamaster je suppose que oui car cela doit être une base de ETA 2893-2.
la revue de la gmt par sur chronomania
revue de la gmt II par Bruno Cracco
25 février 2006 à 17h18 #420000037435Hatari
Membre- Dynamo a écrit:
- perso pour l’explorer II c’est la presque la même montre que la GMT II sans la lunette tournate. Pour l’omega Seamaster je suppose que oui car cela doit être une base de ETA 2893-2.
la revue de la gmt par sur chronomania
revue de la gmt II par Bruno Cracco
Sans vouloir être difficile, j’ai lu ces articles avec grande attention, toutefois au final la lunette fixe de l’Explorer II est une version simplifiée de la GMT II si je comprends bien !
Mais à l’usage hormis le prix moindre/valeur de revente de l’Explorer II comparé à la GMT II, l’Explorer II n’est-elle pas plus solide/costaude avec justement cette lunette fixe ?
Merci des avis et conseils :cheers:25 février 2006 à 17h45 #420000037436Dynamo
MembreNon, car la lunette fixe sera plus dificile en maintenace et elle s’abira de toute façon.
Sinon il y a la Enicar Sherpa Jet
UK
chronomaster.co.uk
NOS Enicar Sherpa jet : £650 (US $1,175) TTCSuisse
Chronotime.ch ou O&W
NOS Enicar Sherpa Jet et NOS Enicar Jet GraphAustralie
Paulsantiques
NOS Enicar Sherpa Jet : 1500 AUD (environ : 927.477 EUR)Sinon en MP pour je vous donne l’adresse d’un site suisse en ocassion ou il y a aussi 3 sherpa Jet de 480.502 EUR – 608.636 EUR – et 634.263 EUR
Dynamo
25 février 2006 à 17h50 #420000037437Invité
MembreLa lunette de l’Explorer est réputée se marquer avec une facilité déconcertante (forme en pente). Et pour la changer… Aïe !
De toute façon, le concept GMT, c’est la Rolex GMT avec la lunette « pepsi ».
Assez plate et légère, robuste, étanche 100m, avec trotteuse et date, certifiée cosc, la complication GMT lui permet de servir de boussole en prime… Le deuxième fuseau permet de ne pas déranger un correspondant étranger à des heures indues, est aussi pratique en voyage. La lunette rotative sert aussi de repère temporel si on veut. Bien sûr, on peut calculer mentalement, mais autant faire utile et simple.
Pour moi, la plus polyvalente des Rolex, avec un historique sympa et une vraie légitimité. J’entends par là qu’elle n’est pas célèbre ni surcotée pour avoir simplement orné le poignet d’un acteur ou d’une veuve.
Le coût d’un insert est dérisoire, le changement plus que simple en étant soigneux permet de donner une personnalité plus habillée ou plus colorée en quelques secondes. Avec l’insert noir, elle supporte un bracelet cuir sans aucun problème, on peut même la porter sans lunette si on veut, ce n’est pas si mal non plus…bizarre, un poil vieillot, mais marrant.
Alain
-
AuteurMessages
- Vous devez être connecté pour répondre à ce sujet.