FORUMAMONTRES › Forums › Budget découverte › Montre en bois… ? !
- Ce sujet contient 36 réponses, 27 participants et a été mis à jour pour la dernière fois par
julien-1, le il y a 13 années et 4 mois.
-
AuteurMessages
-
4 juin 2013 à 0h36 #410000094773
duf666
Membre








In total, the timepiece is composed of 188 pieces, of which 154 (with hands) make up the movement. Planning/construction took up 1800 hours within 7 months.
Mr Danevych attests his watch a power reserve of 24 hours and an accuracy of 2-3 minutes in 24 hours which I think is outstanding!
At this point I should stress the fact that each single element of the watch received due attention as to the correct type of wood to use. Overall, the watch is made of the following wood types: canker of apple-tree, plum-tree, walnut and birch, wood from Australian Guaiacum, Crimea box, bamboo, African Bubinga!
The diameter if the movement is a solid 36 x 13 mm. The smallest parts from wood are composed of a pinion with 0.9 mm diameter (8 teeth, Crimean box) and a bearing pin with 0.12 mm diameter (Guaiac). Eight springs are used in total, four of them made from metal (the only metal parts) and the other from bamboo (as I mentioned already)!
But there are also fairly large wooden pieces, such as the case – and the bracelet! This must be one of the coolest folding clasps I ever strapped on my wrist. Again, stellar details to be admired, just pay attention to the tight tolerances of the bracelet’s elements. It is very comfortable as well.
Which brings me to the last part of my article: the wrist presence!
To wear such a watch is totally without precedence. The warmth and lightness of the entire watch, the colours, the sound – one is certainly unprepared for such an experience. As you can see its not exactly small and thin (46 x 18 mm) but who cares?!
Et ça fonctionne…
4 juin 2013 à 0h51 #420002157592gmal
MembreEtanche a combien?
4 juin 2013 à 0h53 #420002157593Invité
Membre- gmal a écrit:
- Etanche a combien?
Peu importe …. Elle flotte
4 juin 2013 à 0h56 #420002157594Maset
MembreLe problème n’est pas celui de la réalisation technique, aussi simple (voire plus) qu’avec du métal, mais celui du vieillissement et de l’usure
Elle ne doit pas tenir le COSC des années celle-là4 juin 2013 à 1h02 #420002157595sandro06
MembreFaudrait pas qu’une termite se cache dans le watchwinder
4 juin 2013 à 1h14 #420002157596Manivel
MembreFantastique performance!
Et belle en plus…Oméga peut aller se rhabiller avec sa 15000Gaus!
4 juin 2013 à 1h32 #420002157597Tristan22
MembreÇa fait rêver!
4 juin 2013 à 2h13 #420002157598Bender
MembreTout en bois
En revanche, plutôt circonspect sur la tenue dans le temps …
4 juin 2013 à 2h25 #420002157599zzzolive
MembreBelle prouesse technique mais aucun interet pour ma part….
4 juin 2013 à 2h36 #420002157600maxou2301
Membre- zzzolive a écrit:
- Belle prouesse technique mais aucun interet pour ma part….
+1 vu qu’elle ne tiendra pas des décennies amha. par contre il faut admirer le travail de réalisation
4 juin 2013 à 2h43 #420002157601julien-1
MembreNe pas oublier l’aspect ecologique …..
4 juin 2013 à 2h59 #420002157602fred-tictac
MembreBonjour,
Elle ne feras pas des decenis. Elle n’est pas belle, mais bon ….
Cordialement.
4 juin 2013 à 3h03 #420002157603guillaume140
MembreJ’ai rarement vue un truc aussi laid
4 juin 2013 à 3h05 #420002157604julien-1
MembreJe sais …
Maintenant ….
C’est la montre a Robin des Bois !!!
M POKORA tu es la ??????
…
OK je sors ….4 juin 2013 à 3h09 #420002157605fred-tictac
Membre- guillaume140 a écrit:
- J’ai rarement vue un truc aussi laid
Bonjour,
Il y en a d’autre.
-
AuteurMessages
- Vous devez être connecté pour répondre à ce sujet.
Sujets en lien
- Breguet Marine 5817: Sa genèse, sa revue.
- Vacheron Constantin – La Symbolique Des Laques
- [Baselworld] Quand doc-le-suisse et pastak vont au Baselworld 2013 – Le Salon
- Récit : La master navigation Watch de Longines – Dernière survivante ?
- Seiko « Sumo » SBDC031 : mes impressions
- Revue: Chopard Quattro 16/1863